After absorption charger goes to storage. But not with a <float voltage, with a higher one! So accoring to the BMS of the Lifep04 battery SOC is always 100%. Any ideas as to what might be the cause of this?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
After absorption charger goes to storage. But not with a <float voltage, with a higher one! So accoring to the BMS of the Lifep04 battery SOC is always 100%. Any ideas as to what might be the cause of this?
@Tharayman this happens to me too, even if the battery has been discharged in the previous 24 hours it goes straight into storage after charging once it's been plugged in. Seems like a bug but since you're using LiFePO4 storage mode is unnecessary anyway so just disable it.
Additional resources still need to be added for this topic
31 People are following this question.