question

pachis avatar image
pachis asked

Contradiction in Manual MultiPlus-3k-120V-(firmware xxxx4xx)-EN

In Appendix A the diagram shows the AC in connections at block A. These show as [left-to-right] line, neutral, ground. In the manual next page, the description for block A says the left-to-right order is "ground, line, neutral.

Which is correct?

Thanks,

PACHIS

Phoenix Inverter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
abrahamsolar avatar image
abrahamsolar answered ·

Hi, Pachis, from the USA. It's always good to report an error in the installation documents.

When there's any uncertainty, I always go by the legend that is imprinted onto the actual circuit board inside the unit.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Thanks for reporting it, I will see that it’s fixed.

I can’t confirm the correct layout, please go by what is printed on circuit board.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.