Phoenix Smart IP43 Charger

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

kris asked May 19, '19

Phoenix Smart IP43 Charger first tests I see two problems:

1. No possibility of connection with Smart Battery Sense

2. Too high power consumption during start-up

charger

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2020-01-22T06:28:25Z

frankcilo answered · Jan 22, 2020 at 06:28 AM

Possibile che non ci sia possibilità di collegarlo allo smart battery sense?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2020-01-23T06:34:26Z

frankcilo answered · Jan 23, 2020 at 06:34 AM

In Phoenix ip43 manual, I read that is possibile connect smart battery sensor with phienix! How is possible?

screenshot-20200122-073852-adobe-acrobat.jpg (688.2 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.