This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I turned my 8kW Quatro off using the VRM on my phone (little button top left). I have done this pervoiusly and it worked well. On arriving at my boat today it turned it on using my phone. But it didn't restart. The attached pic show the VRM of my boat. In the 'control section' it shows the quattro off. But in the mode section it is 'on'.
Grateful of some help - its very cold here.
Tim
Yeah, I've been having the same problem. I've heard that if you can still connect to the cerbo then you can try going into the quattro subsection and doing a redetect. That might work.Also pulling the cable from the cerbo and reinserting it fires up the quattro for me if you are on site. Its a bit annoying.
There seems to be an update to VRM. Maybe refresh the page?
You can also connect to Remote Console and change mode that way.
Thanks Guys for you help - in the end I managed to resolve the issue by unplugging the Cerbo for a few seconds. Tim
]
