question

pb1866 avatar image
pb1866 asked

MPPT Streetlight and Cerbo

Hi, I have 2 smartSolar MPPT 100/30 and 1 Cerbo gx.

I would like to use the streetlight function to start a LED light at night, but at the same time I have to use the VE.direct port to connect to the Cerbo. How can I get this to work?

Streetlight
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
stone17 avatar image
stone17 answered ·

I would like to know this too. Same setup. MPPT Streetlight and Cerbo.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image
Alexandra answered ·

With the VE direct in use both are not possible.the Cerbo has relays you can use, but it will be more time based rather than light based at least through the normal menus.

There is possibly a more clever way through node red, but seems a bit overkill when a simpler option is just buy a daylight sensor.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic