This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, set up: - 3x MP2/5000 - ESS - 3 Phase - 1x EM24 RS485 - 1x RS450/200 - 16s 280Ah LF Sometimes the values displayed in the VRM portal are not correct or the control strategy does not make sense. For example, a consumption of 0 watts is displayed, although power is drawn. Sometimes the battery is also discharged, although there is enough PV. In the attachment 2 examples. Does anyone know the problem? The trick with the headphone input can no longer be done with the new devices.
After updating the firmware on my cerbo GX i get some really wrong values for the AC Loads.
The multiplus ii is pushing out about 2400 watts and the grid meter shows -1568 W. That should calculate to about 800 watts of loads.
Before the upload that was shown correctly in the AC loads.
