question

wysiwyg avatar image
wysiwyg asked

Lynx Shunt Issues

Hi All,

System working fine, and suddenly Lynx Shunt is no longer reporting the correct SOC and other info. Even the infographic is showing a feed going into batteries in the middle of the night and AC is showing a load of 96W which has always been the same as its a fridge running.

Also in devices menu, the VRM instance number is showing as 0, for all other installations its showing a number like 276 or similar. See image attached.

Had to change the battery monitor from Lynx Shunt to the Multiplus Inverter/Charger in console settings.

Any ideas on what might be wrong? faulty Lynx Shunt?

lynx-shunt-screen-shot.jpeg

VRMBMSlynx shunt
lynx-shunt-screen-shot.jpeg (82.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
gabics avatar image
gabics answered ·

I am having the same issue. Except my firmware is v1.10. Tried disconnecting the shunt, rebooting CreboGX. The VRM instance ID is always 0.

Anyone able to resolve this issue?


Thanks for your help

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.