Hi,
Due to the inability to source Victron compatible meters with CT's, we are looking to use 2 x ET112 meters in parallel. According to the ET112 instructions, this is possible with the following adjustment (2. Installation and configuration (victronenergy.com) )
Please note that you can connect the ET112 in parallel, but need to change the modbus address to another number using the UCS Desktop configuration software from the supplier,
Question - If two ET112 meters are measuring the grid input, each meter communicates to the cerbo, in the cerbo they are each set as "Grid Meter", does the power of each meter sum together for a single reading in the system?
The attached diagram outlines the concept.
Thank you
Alternatively, if anyone knows where a EM330DINAV53HS1X27 or CT-compatible victron meter is in stock and available for purchase, the above setup could be avoided.