Dear Community,
I am new with victron energy, my configuration is as following:
Multiplus 12/500/20
Cerbo GX
MPPT 75/15
and the operation is as following:
1- AC grid connected without any load. Multiplus indicates storage and MPPT indicate float
2-AC grid connected with AC load. Energy flows from grid and Multi still in storage and MPPT in float.
I expected the system should use energy from batteries.
3.- If I disconnect the AC grid, the Multi switch to inverter mode.
The operation from (2) seems very strange, the battery is full and there is solar energy available but it is not used.
Is this operation correct?
What should I change to give priority to use energy from batteries ?
Thanks,
César