I have the MultiPlus-II 48/3000/35-50 120V with 4 LifePo 12V in series. What is the recommended charger setting for this setup? I can't seem to find for a 48v setup.
Thanks!
Jeff
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have the MultiPlus-II 48/3000/35-50 120V with 4 LifePo 12V in series. What is the recommended charger setting for this setup? I can't seem to find for a 48v setup.
Thanks!
Jeff
12V batteries in series are not the best choice.
Do you have some kind of BMS?
Do you have access to the terminals of the individual cells?
Before connecting those 4 batteries in series, you must fully charge them all with a 12V LiFePO4 charger (or an MPPT set to 12V battery).
Additional resources still need to be added for this topic
73 People are following this question.
How can Multiplus 1 be used to increase charge power in ESS system with Multiplus 2 and GX
>10kVA and dedicated production meter
Camper Van Schematic - please critique
Are my MultiPlus II VE Config charger settings correct for 4 x Omnipower 200Ah batteries?
firmware compatibility three phase system MultiGrid-II and MultiPlus-II