This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Good day team
I would like to know if I have a ESS systems running with a can bus bms battery. When I reset system on ccgx. What happens between battery ccgx and Mppt?
Do they still see ESS or does the Mppt switch Pv production off?
It happen on a site of ours.
Please advise if possible.
From tests here :
If i reboot the colorgx here the quattro and the mppts just do there work in between the reboots.
Didnt test yet by disconnecting the color of longer time.
Since the ESS is installed on the quattro , i think it should keep on running.
But for safety program every mppt individual with the correct battery settings ;-) ( i did that here too).
When the inverter is out/down, the mppts will still be stand-alone units...
