question

dorian-cameron avatar image
dorian-cameron asked

VRM RSSI Widget no Data

When i add the signal strength widget, or a custom widget with RSSI/SNR etc, it only displasy "No data".

System is Cerbo GX and Victron 4g-LTE-GSM. I can remote console and realtime control the system perfectly. Downloading the log from VRM also has no data for gateway signal strength.

Any ideas? I have multiple systems deployed and the same issue is present.


screen-shot-2023-01-26-at-100641-am.png

screen-shot-2023-01-26-at-100649-am.png

VRM
screen-shot-2023-01-26-at-100641-am.png (65.4 KiB)
screen-shot-2023-01-26-at-100649-am.png (56.5 KiB)
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@Dorian Cameron

These are often measurements for internal use. Not generally reported to the VRM.

For example when the CPU goes above 50°C the Bluetooth is switched off.

0 Likes 0 ·
dorian-cameron avatar image dorian-cameron Alexandra ♦ commented ·
@Alexandra interesting thanks. Im not to concerned with the cpu temp, It is the network speed/quality data im most interested in.
0 Likes 0 ·
Alexandra avatar image Alexandra ♦ dorian-cameron commented ·

@Dorian Cameron

Some other feedback. Those two parameters do work for a GlobalLink, not GX GSM.

0 Likes 0 ·
dorian-cameron avatar image dorian-cameron Alexandra ♦ commented ·

I thought that might be the case. Thanks for your feedback.

0 Likes 0 ·
0 Answers