Hi there,
A quick question regarding the Orion Tr Smart Non Isolated 12/24 30a.
I recently installed it with a Victron Lithium Battery 160ah. The device seems to be working because it is charging the battery. However, it is always in Bulk, even after driving 2 hours while the battery is at about 13.2V (all cells are at about 3.30V).
My installation is:
- Fiat Ducato 2010 2.3 JTD 130ch
- Orion Tr Smart Non Isolated 12/24 30a plugged to a Cyrix-Li Charge.
- The Cyrix-Li Charger is plugged to a VE.BUS.BMS and goes to the battery.
I, so far, never lack battery and the battery is rarely below 12.8V, which is what I want in the end.
The entry V is about 13.5 to 14.0V and the output V is in general at about 13.5V to 14.0V.
The settings are in the below screenshots.
However, I seem to not be capable of getting a full charge.
I sometimes got the absorption and floating mode only once in a few weeks of use.
I am wondering if the fact that the charger is always in Bulk mode is normal or if there is something off?
Thanks in advance for your reply.
Rémi