question

le-promeneur avatar image
le-promeneur asked

PV tension without PV pluged in

Hello every one.

I checked the manual and the forum without finding an answer.


I have cinnected an MPPT 100-50 to a 12v battery.

The MPPT turns on and communicates via vrme well.

My question is : I have 14V on the battery and 13V on the PV plugs.


is it normal to have tension on the PV plugs without Solar Pannels?


Thank you










MPPT Controllers
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@le_promeneur

based on other posts on the forum, it is worth sending it in for an RMA

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

le-promeneur avatar image
le-promeneur answered ·

Thank you Alexandra.


Someone asked me

"By PV voltage - voltage you have tested with a meter? or voltage reported by the mppt?"

Actually, both meter and the Reading of MPPT through Victron Connect.

Does anybody have checked this?


I didn't find a post dealubg with this in the forum. I will look again.

Thank you














1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@le_promeneur

That was me then I edited my answer. Usually there will be a fuse blown internally that does that.

0 Likes 0 ·