Hi,
I got a Multiplus 24/3000, Venus GX and 2x MPPT 100/30 Solar chargers running togehter in an ESS System. I want to change from AGm to LiFepo4. The BMS iwant to use for the LiFePoS has a LOW-Voltage Protection Line and an OverVoltageProtection Line which i want to connect to the multiplus like it is described in https://www.victronenergy.com/upload/documents/Manual-Connecting-other-lithium-battery-systems-to-Multis-and-Quattros-EN.pdf
and setup the ESS assistant with two Signal BMS. The pdf above is meant for the Multiplus connected to shore, but does it work for Home ESS System too?
When there is no OVP or LVP fault, the AUX input and TempSense Input will be short circuited.
If there is a OVP or LVP fault, the Input pins of Temp Sense and Aux are NOT short circuited
Question:
1) Does the ESS System (Venus GX) stop the two Solar Chargers when there is an OverVoltage Signal from the BMS like described above?
2) Does the Multiplus stop inverting when there is a low voltage signal?
Kind regards,
Georg