Please could a firmware update be issues to allow setting of the following on the Multi RS Solar:
1) ESS Mode ("Keep batteries charged", Optimized with/without battery life")
2) Minimum discharge SOC
Ideally, these should be setable via NodeRed, Modbus and Dbus.
If this feature is in a beta build then I'm happy to test it for you :)
I charge my batteries overnight using cheap rate electricity but this requires all sorts of fiddling using the PC verision of VictronConnect and a Macro recording piece of software as there is no way to do this automatically in the settings or via an API. I also keep the AC input disconnected during the day unless the AC output load is too high because the newer firmware draws more idle power from the grid for some reason. The new firmware v1.11 feature to allow AC input control is half way there but lacks a timed function and any charge level control.
If the two items above were available for writing then I could achieve everything I need to do via NodeRed.