question

stargazer7 avatar image
stargazer7 asked

Is it possible to monitor a 100amp split phase US 120/240 system using CT's instead of shunts

Currently I have a Ted 5000 monitoring my AC power from my power company. I am moving am starting to build my Victron system up, and I would like to start monitoring the AC using CT's like I do with my Ted 5000 as I rent my house, so re-wiring the main power feed, could be troubling.

I have looked at the ET340(65A CT's) and ET112 (100A Shunt) so neither of these solutions would work? Has anyone else been able to get a power monitor using CT's for a 100 amp system?

power meter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Martijn Coster (Victron Energy Staff) avatar image
Martijn Coster (Victron Energy Staff) answered ·

Hi @Stargazer7,


This is a technical installation question.
I would advise you to contact a Victron dealer to help you with this.
if you do not know who your dealer is, please visit: https://professional.victronenergy.com/support/

best regards
Martijn Coster - Victron Energy

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Mike Stasko avatar image
Mike Stasko answered ·

@Stargazer7 did you figure out your question? I have a similar scenario.

Thanks

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic