This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi.
Has anyone figured out if the little plastic connector at one end of the cerbo's power cable is something standard that can be found on, say, digikey?
(and, yes, I've searched the forum and I've seen the posts with the standard "just ask your local dealer". They don't have the little connector or even the whole cable as spare parts)
Thanks
I'll answer my own question. On one side of the connector you can read WJ15EDGKD -3.81.
3.81 (mm) is the distance between the poles (I think). WJ15EDGKD would seem to be some kind of product code but if you google it you won't find a place to buy them. The two letters WJ in the code seem to indicate one particular producer of that type of connector (WANJIE).
So, if you remove the part that is producer-specific and just search for 15EDGKD or 15EDG, for example on aliexpress, you'll find various options. I bought these and they seem very good.
Also called "Phoenix" connectors - the 2-pin is easily found on Amazon, but I haven't found the 8-pin double-row version that is used for the tank & temp sensors.
