I have a 230v MultiPlus 24/3000/70-50 running firmware 1910159 (latest Non assistant). Upon connection with a Cerbo GX (firmware v3.00~14) via VE.Bus I have noticed the Cerbo recognizes the Multiplus but is unable to retrieve data from the Inverter in real time. It only works manually - if I press the "Press to redetect" button in Remote Console it does refresh the values.
I was wondering if any of the following would improve this:
1) Updating the firmware on the Multiplus to 1910209 (latest Assistant Firmware).
2) Connecting the Multiplus to the Cerbo via USB using the MK2 adaptor.
Would appreciate any feedback.