I have two 50 amp Phoenix smart IP43 chargers that I’m going to use to replace two smaller chargers installed on our boat. The current chargers are controlled by a single 15amp (120v) breaker/switch on our panel.
I believe a 15 amp breaker may be too small for to 50 amp chargers but I still want to maintain the use of the switch.
Can I wire one of the smart IP43 chargers to the breaker/switch and have the second charger connected to its own breaker (remotely mounted) but have the relay of charger 1 connected to the remote on/off input of charger 2 so that charger 2 turns on/off when I turn power off for charger 1?
