This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I just purchased a 2015 Casita with a BlueSolar MPPT 75/15 controller mounted inside the very small battery compartment on the side (picture below). Is this ok? Is it safe in general, as in sparks and explosions, and is it safe for the controller, in terms of gasses?
The picture is rotated for some reason. Controller is to left side of battery
Thanks for any help provided.
DebiT If your batteries are sealed then it should not be a great problem.
It is not ignition proof and if the battery compartment is sealed maybe not a good idea. Also any gassing can carry sulphuric with it so corrosion could be a possible problem.
I can guess why it was put in there, voltdrop between the controller and the battery. The 75/15 terminal size will only take 6 mm² / AWG10 cable and it is possible that moving it using 6 mm² / AWG10 would lead to an unacceptable voltdrop. Personally I look for better then 0.5% voltdrop at 50% of the maximum charging current. That using 6 mm² / AWG10 cable would mean a cable run of just less than 2 metres - unless the cable size was increased close to the 75/15.
