Hi
I have 2 12v AGM batteries in parallel, I can put a smart battery sensor on each battery and get the T and V from each. But can the MPPT controller use both? eg in case 1 starts getting to hot or shows voltage issues?
Thanks
Mark
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
I have 2 12v AGM batteries in parallel, I can put a smart battery sensor on each battery and get the T and V from each. But can the MPPT controller use both? eg in case 1 starts getting to hot or shows voltage issues?
Thanks
Mark
8 People are following this question.