question

delta5 avatar image
delta5 asked

BMS Cable type

I have an Easysolar 11 48/5000 and Pylontech US 5000 batteries

1 The BMS cable I have is W10SCAN30RJ1 is this correct?. Other information specifies a special cable.

2 A voltage sensing cable is supplied there is only one terminal but 2 wires and the connection is impossible to reach with a screwdriver. I this wire needed or is there an internal connection on the Easy Solar 11

lynx bms
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

It is all clearly documented in the victron/pylon doc "CAN bus wiring" section:

https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

LED indications, warnings, alarm and error codes

Lynx Smart BMS product page

Lynx Smart BMS online manual

Additional resources still need to be added for this topic