question

jessika avatar image
jessika asked

Mppt 100/20 no output allí conected

I appreciate the help, I am new to this, I would like to know if it is normal for the load output to put 0, when there are cameras, control unit and so on connected to the battery...
The mppt 100/20 is new too, is it broken or am I doing something wrong?
MPPT ControllersMPPT SmartSolarmppt state
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
snoobler avatar image
snoobler answered ·

"Load output" only registers the items connected to the load ports of the controller. If something is directly connected to the battery, the MPPT has no way of seeing that output.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jessika avatar image
jessika answered ·

Muchas gracias, dentro de mi desconocimiento, como se podría saber la salida de carga de la bateria?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic