question

Maciek avatar image
Maciek asked

3x Multiplus without Cerbo for maintenance

Hi. I need to replace my Cerbo GX tomorrow in shop. I have system with 3x MultiplusII working in 3P configuration.

is it safe to leave system running for 10 hours without Cerbo connected ?
before I used to only restart or disconnect Carbon for one minute and it was OK but I’m not sure how it will work in longer run.

Multiplus-IIcerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

If you are running an ESS you need a GX device, without the system will shut down after a few minutes.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Maciek avatar image
Maciek answered ·

Thank you Matthias.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.