question

ramassamy avatar image
ramassamy asked

2x mutiplus with pylontech us 3000 won't start

excuse me if the subject has already been treated several times, but I have low internet connectivity in my island. I therefore have two multiplus: one as a master and the other as a slave. I am in ESS mode and I recently bought 2 pylontec us3000 batteries. I can't get them to start. I suspect that the battery level is too low to let me start them... Indeed, when I turn them on: the SOC lights do not appear, only the RUN mode light works. As soon as I turn on the multiplus , I go directly to "alarm" mode with a red light and I have no more power, not even for the CGX
Pylontech
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
ramassamy avatar image
ramassamy answered ·

Hi

i found myself the problem...

i hesitated to lower the cuto off dynamci values on the Ess settings,

i lowered to 43v and it started

now all is ok

i have changed the parameters to 46v now ...


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ramassamy avatar image
ramassamy answered ·

..any idea... :)

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.