question

over-and-under-victron avatar image
over-and-under-victron asked

VRM access hanging at 40% on VictronConnect

Screenshot_20230101_175125.jpg


I recently added Guimods and a driver that allows my two Overkill BMSs to talk to the Cerbo.

VRM access had been working great until these two changes but not sure if it is related.

When I try to access VRM through Victronconnect it hangs at 40%. It does say the Cerbo is online. It did this yesterday and I did a powercycle on the Cerbo and it worked for about 18 hours and now it happened again.

Any suggestions?

cerbo gxVRM
screenshot-20230101-175125.jpg (264.9 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
houser avatar image
houser answered ·

Saw the same here now. Deleted and reinstalled Victronconnect and redid the authorisation scheme, and it started working again. FWIW.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.