question

Rob avatar image
Rob asked

Skylla-IP65 Charger Control

I'm planning a system that includes a Lynx Smart BMS, a Cerbo, and a Skylla-IP65 charger. In the Specifications section of the manual it says "Li-Ion Charge Curve: 2 stage, with on-off control or VE.Can bus control."

I understand the part about on-off control wired to ATD on the BMS.

The "or VE.Can bus control" part suggests that the BMS can take full control of the Skylla including charging current and voltage without need to hardwire the ATD connection. Do I understand this correctly? Is this the same as DVCC?


cerbo gxVE.CanSkyllalynx bms
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Skylla-IP65 product page (12v, 24v)

Skylla-i product page (24v)

Skylla-TG Charger product page (24v, 48v)

Skylla-TG GMDSS product page (24v)


Additional resources still need to be added for this topic

LED indications, warnings, alarm and error codes

Lynx Smart BMS product page

Lynx Smart BMS online manual

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic

Cerbo GX product page

GX family product range

Cerbo GX & GX Touch datasheet

Cerbo GX Manual

Venus root access document