question

dchivu avatar image
dchivu asked

VE connend doesn't see Multiplus 24 3000 70

Hi everybody! I have a problem and I really need help. I have bought 3 2nd hand inverters Phoenix Multiplus 24 3000 70 and I'm trying to configure them in parallel but I'm not able to connect. All downloaded softwares are connecting to MK2-USB adapter but cannot detect the device. The firmware version is: 1812143. I also tried to configure them using the DIP switches following the instructions of the manual but unsuccessfully. Please help, I'm in Africa and I cannot contact anybody

connection issue
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

The Phoenix MultiPlus is to old for VictronConnect you have to use VE.config and VE.Bus Quick Configure.

https://www.victronenergy.com/support-and-downloads/software
(VE Configuration tools for VE.Bus Products)

https://www.victronenergy.com/live/ve.bus:manual_parallel_and_three_phase_systems

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic