question

Mohamedmahomed avatar image
Mohamedmahomed asked

VRM Dashboard Showing Incorrect Data

Hi, I have a Multiplus 2 10/8 with 2 by 250/100 Smart Solar MPPT and a cerbo GX with Touch Screen. The Victron stopped feeding back to grid. We updated the Firmware and reprogrammed the system. Currently it seems to feed back but the numbers on the Dashboard are incorrect and the analysis shows that it is not feeding back. screenshot-20221223-024725.png

dashboard display
screenshot-20221223-024725.png (79.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Mohamedmahomed avatar image
Mohamedmahomed answered ·

HI, I think the question needed more information. It is either not feeding back or the dashboard is incorrect. More detail, there is minimal critical loads currently, but the system shows very high loads. It also indicated feedback, but when you run an analysis, it shows no feedback. please see attached pictures

1671865370358.png

1671865408216.png


1671865370358.png (74.1 KiB)
1671865408216.png (65.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nickdb avatar image
nickdb answered ·

Looks like your energy meter is installed incorrectly.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Mohamedmahomed avatar image Mohamedmahomed commented ·
It was working for a long time. will check when we open in the new year. Thank you


0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic