This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi can any one help wired up rs 6000 inverter to cerbo gx and pylontech 5000c battery.
Updated everything now rs showing disconnected and sometimes disappears from. Cerbo gx.
Pylontech with victron cable to inverter. 500 kbits
Rj 45 cable to rs 6000 setting 250 kbits
From Pylontech to CerboGX BMS-Can port with a BMS type A cable and terminator.
Make sure the correct end of the cable connects to the battery.
Set this port to 500kbps.
From MultiRS to CerboGX VE-Can port with normal network cable (568B wiring) and terminator (your photo shows this terminator not inserted correctly into the VE.Can port)
Set this port to 250kbps.
BMS cables manual with pinouts:
https://www.victronenergy.com/live/battery_compatibility:can-bus_bms-cable
