On my sailboat, I have 5 Victron 300 ah smart lithium batteries my installation. They were not identified as to which battery is which when they were installed. Using Victron Connect, I can see all the batteries, their serial numbers and their data but I cannot tell which data goes with which battery. I would like to know identify each battery without removing them which would be very difficult on my boat. Is there a way to do that? I have tried to remove the 3 wire interface cable from one of the batteries but that just shut the whole system down. I have a Cerbo GX and a Lynx 500 Smart BMS. All this was installed in November of 2021.