This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Does VRM show the total of both DC and AC loads in the consumption readout based on if you enable the "Has DC system" option via Cerbo GX? I just enabled that option yesterday and I just now noticed my consumption for that day only is reading much higher compared to previous days. I want to make sure my AC loads aren't suddenly higher and that this is expected behavior. If yes, is there a way to breakdown the view to show total DC consumption and AC consumption? Maybe in advanced view perhaps?
Looks like when I enabled the "Has DC a system" option in Cerbo GX, it enabled additional views in VRM within the "Gateway" device in Advanced View. I now see "System - DC System", so I can now couple that with "System - AC Consumption" to hopefully see an accurate and segregated view of all battery consumption for the day.
I would still like to know with certainty if the consumption being reported is now including both DC and AC loads.
Not sure what you're looking at. All I see is AC consumption on VE bus
I described how to enable the DC system monitoring above.
See attached Screenshot_20221218-081945.pngscreenshot.
