question

tomi87 avatar image
tomi87 asked

Beaglebone Black Cape Firmware MK3

Hello, I would like to ask if anyone has the firmware for the PIC18F24K22 Beaglebone Black cape MK3. I would like to make a Venus GX Beaglebone Black. I would happily buy the firmware if someone had it.

Venus OS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wkirby avatar image
wkirby answered ·

The MK3 firmware will not be available for that PIC.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Manuel Krenzke avatar image
Manuel Krenzke answered ·

Hi tomi87,

the firmware is not available to the public, not the source code nor a complied version of it.

What you could do is either to use a USB-MK3 dongle at the USB port or just open it up and desolder the pre-programmed PIC from the PCBA.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron Venus OS Open Source intro page

Venus OS GitHub (please do not post to this)