AGM 560Ah
The more I test the two ORION SMART TR 12-12s I have in parallel the more frustrated i get with the lack of real "smart" integration. See thread here as well: https://community.victronenergy.com/questions/69199/vebus-orion-smart-tr-networking.html
It seems that the BMV-712 SOC gets an early reset when charging with the orions. I have it set to be reset at 4%A of total Ah of capacity, but this is a bit over 20A going in from the orions that resets it...
Recently i discharged to 75% SOC (roughly -140Ah) and then after 20mins of 20-25A going in from the Orions in parallel i am reset to 100%SOC....
Should i be lowering the 4% to 2%? Or will that have a negative impact on battery health?
Should i increase the time @voltage/amps from 5min
Should i have a different setting for summer vs winter? (Temp values for battery characteristics all put in already)
Is this all an issue stemming from a lack of communication between the Orion "SMART"s and the BMV 712/actual smart network? Really disappointed that with this and my "smart" 240-12v charger i will have an absolutely unknown SOC in winter where I need it to be more accurate.... Or am i misunderstanding the situation and settings of the BMV 712?