question

smilyboy avatar image
smilyboy asked

Multiplus2 on only 1phase in a 3-phase house system

Hello,

Is it possible to install a MultiPlus-II 48/3000/35-32 combined with a single phase PV and Battery on only one phase of a 3-phase-grid house system? Target: Reduce cost compared to a 3-phase-system, but still have a backup in case of grid power loss. All the critical loads in the house are connected to that one phase. There are no specific 3-phase-loads in the house used.

I ask, since so far I've not seen in any description duch a system design...Thanks for any advice!

multi phase
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
marekp avatar image
marekp answered ·

@Smilyboy

Yes, you can have Multiplus only on one phase and only this one phase will take advantage of battery backup.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic