Hi
I have now installed Smart Battery Sense and connected it to the IP43 through VE.Smart Networking. Yes, I can connect with IP43, but the charger does not follow the reference value set on the absorption stage and far exceeds what is sent from Smart Battery sense!? Is there any solution or experience with this?
Example: The absorption stage starts at 16.8V, but the charger keeps charging even when the value from the Sense sensor is on the reference value, so I get an overcharge warning from the BMS!
Equipment:
Phoenix smart Charger 12 | 30 (1 + 1) fv v3.31
REC BMS v2.8
Battery ( 4S5P) 17,5Ah (16.8V) (Cell 4.2 V)