question

r2d2wat avatar image
r2d2wat asked

Possible to set amperage control for load?

I want to set up a 2 amp trickle charge for my rarely used generator starter battery. Can the amperage be regulated on the small controllers?

battery charging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

If you are referring to the Load Output on the MPPT charge controllers then no, it cannot be adjusted for Voltage or current regulation.
It's purpose if for driving loads, not for battery charging.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

r2d2wat avatar image r2d2wat commented ·

Thanks. I really like the Victron 100/50 and 100/30 for my large solar panels, I was hoping to get a couple of small ones for my 4x 130 w panels. I guess I’ll need to keep my old regulator that does the 2 amp trickle charge.

0 Likes 0 ·