question

cedric avatar image
cedric asked

Problèm Relay k1 and k2

Multiplus relay

Hello


I have a problem on my inverter multiplus 24v 5000 when I parameter the relays k1 or k2 after the initialization correctly ended the relays do not change state at the set thresholds


Thank you

Multiplus-IIRelay
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wkirby avatar image wkirby ♦♦ commented ·

Please could you explain what you are trying to do? What are the parameters and thresholds that you are setting?

We need more information to make a sensible answer.

0 Likes 0 ·
1 Answer
Paul B avatar image
Paul B answered ·

Please privide details on how you are using the assistants to activate these K1 or K2 relays.

otherwise we have no idea as to what to look for

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

MultiPlus-II Product page 

MultiPlus-II Manual

Multiplus-II GX Online Manual

MultiPlus-II 230V Datasheet 

VE.Bus Error codes