Our customer has a problem with BMV-712 Smart
firmware v2.92
Voltage number OK for 48 V system
but the current and Wattage numbers are high like 1000 A
for shunt 500/50. We have advised to make the restart but
no changes.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Our customer has a problem with BMV-712 Smart
firmware v2.92
Voltage number OK for 48 V system
but the current and Wattage numbers are high like 1000 A
for shunt 500/50. We have advised to make the restart but
no changes.
Have you performed the zero current calibration?
https://www.victronenergy.com/media/pg/BMV-712_Smart/en/all-features-and-settings.html#UUID-c5fc25c8-93aa-2f98-bfe3-46cb4dd6cc8d
Many thanks, it seems that there is something else wrong, in the VRM MV-712 Smart
firmware v2.92 VRM Portal ID c0619ab208cf
Voltage number OK for 48 V system
we can see the current MV-712 Smart
firmware v2.92 VRM Portal ID c0619ab208cf
the current 1014A and Wattage number 48000W
43 People are following this question.