Can someone tell me, why "limit charge voltage" doesn't work? But in the same time, current limit works well.
Cerbo GX is not connected to the battery.
For "Limit managed battery charge voltage" I set max value: 56.6V
For "Limit managed battery charge current" I set max value: 35A
Are there some pitfalls?
I have the system:
- Victron MultiPlus 5000/48/70
- Cerbo GX
- LFP battery with I/O: 1x RS232 (RJ-11), 2x RS485 (RJ-45)
No CAN interface (RJ-45)
Like this one: https://www.xdbattery.com/512KWH-48V-lifepo4-Rack-Mounted-battery-module-309.html