question

jostmario avatar image
jostmario asked

Daly bms over CAN

Hallo,

I have Connect the daly bms with venusOS over CAN bus.

But the ampere is ampere + 3000.

Chen everyone help me



BMS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
panicman avatar image
panicman answered ·

Hello, how did you connected it? Over the interface board or directly? how did you managed it to run? I'm trying it since days, but the BMS is not visible in the device list :-(

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tochal avatar image
tochal answered ·

HI,

i haven't still started, i ordered interface board and waiting to receive it,

meanwhile i found this, it may be helpful. if you want, take a look, may be it helps

https://github.com/Louisvdw/dbus-serialbattery

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

panicman avatar image
panicman answered ·

Ok, in the meanwhile I managed it to run over CAN.

You can see the solution here: https://community.victronenergy.com/questions/178547/multiplus-ii-connection-with-daly-bms-daly-interfa.html?childToView=179914

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.