Hi All
I have a new Phoenix Inverter Smart 24/3000.
There is a a combined setting, for Low Battery restart and Alarm:
This means that, when your battery gets low, the inverter shuts down.
It then restarts almost immediatly, while the battery is still flat!
This is because the Restart Voltage is the same as the Shutdown voltage.
On the Multiplus, you have separate settings for 'DC input low-shutdown' and 'DC input low restart'
This allows you to shutdown the inverter when the battery gets low, and then have the inverter not restart until the battery is fully charged.
Please could the settings on the Phoenix Smart be changed to 2 seperate settings, like the Multiplus.
Thank you very much for your time!
