question

Paul Simon avatar image
Paul Simon asked

MPPT 100/20 virtual load output max current

Hello!

How much current can the virtual load output (alternate TX function of the uart) provide. Will it be enough to drive an optocoupler?

MPPT ControllersMPPT SmartSolar
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul Simon avatar image
Paul Simon answered ·

Well, premium priced product without premium customer support... Never mind - I found out myself: a PC817 series optocoupler with a 2K input resistor works flawlessly from the virtual load output. Didn't try to determine the maximum current the TX-pin is capable of. But apparently the 2.5 mA are enough to drive the opto.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
This site is staffed by unpaid volunteers, with occasional input from Victron staff. Generally if we can't answer a question, we don't guess and get it wrong. We hope that someone who knows is around.

The official primary support is through your dealer.


0 Likes 0 ·

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic