replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

wysiwyg asked Nov 30, '22

High Temperature Solar Charger Disconnect Setting?

Hi All,

I am using a Temperature sensor connected to a Lynx Shunt (Not the Lynx SMART Shunt), a 150/85 MPPT, Cerbo GX and Multiplus Inverter and a 48V AGM Battery bank. Had a high temperature alarm today and the MPPT charger did not disconnect.

Where can I set a MPPT charger disconnect upon reaching a certain temperature?

Mark

MPPT Controllers Temperature Sensor lynx shunt

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space