Hi I have a problem ( I think ) with my Victron it is a Phoenix system multiplus 12 volt 1200va 50 amp with a with a Phoenix Panel control.
The only dip switch turned on is dip 4
The symptoms are no power to the 240v sockets.
No lights on on the panel unit If I disconnect and reconnect the 240 volts power they briefly flash the socket will power for a second then off the lights go out on the main box the Control Panel lights for a second makes a noise power to the socket is for about a second then the red light comes on saying overload
I have disconnected the inverter charger and connected the two plugs in and out 240v to bypass the main box and power is now back to the sockets. No including the inverter now, but the panel is saying there is still an overload and it is not connected to the inverter.