question

bill-wilson avatar image
bill-wilson asked

CerboGX not recognising the generator

Our Installation consists of 2 x 10Kw solar panels and Fronius Primo Inverters

60Kw Battery storage

2 x Victron 48|10000|140 inverters and a Victron Cerbo GX


We have a mains supply and a generator which we change over via a manual switch.


When on mains it works fine but when we switch to generator there is no mains input shown on the display. We have checked that 230V is supplied on the output side of the changeover switch.


Also ideally we would like the supplies to just charge the batteries and for the installation to run off the batteries to support a small server farm.

cerbo gx
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers