question

francois64200 avatar image
francois64200 asked

BMV-700 /BMV-702

Dear all,

Just to be sure that if I use the BMV-702 to monitor just one battery instead of multiples it will work properly?

Thanks!

BMV Battery Monitor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Mark avatar image
Mark answered ·

Yes no problem.

You can either leave the 2nd input unused, or buy the temperature sensor accessory and monitor the battery temperature.

If you also have a SmartSolar Victron MPPT, consider the BMV-712 as you can Bluetooth link it to the MPPT to improve the charge voltages.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Willem avatar image Willem commented ·

how would you conect the bmv 712 to the charge controller using bluetootg

0 Likes 0 ·
Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ Willem commented ·

With a VE.Smart network. It is explained here:

https://www.victronenergy.com/live/victronconnect:ve-smart-networking

0 Likes 0 ·