Quattro 10kva, AC1 in Mains, AC2 in Genset : AC1 out & AC2 out control ?
Quattro 10kva, AC1in is grid Mains AC2 in is a Genset : AC1 out & AC2 out control ?
System setup. AC1 out is for essential loads, AC2 out is for non essential loads.
When in grid failure, power via battery through inverter to AC1 out loads only
When forced generator start via Cerbo. power on AC1 out only.
We wish to have power on form generator AC2 input to AC1 out as well as AC2 out. ???
Is this possible?
