question

jankoeppen avatar image
jankoeppen asked

Self-consumption on L1 only.

Hi, I have set up my system with 3x Multiplus, 1x MPPT250 and a BYD BBox Battery and use current transformers for measuring input current.


screenshot-2022-11-18-142313.png


I have seen, that ESS does only work on L1.

In Backup Power (grid switched off) it works fine on all 3 phases from battery and MPPT.

I have configured ESS-Assistend for L1. Is there a trick to make it run in self consumption on all three phases?

Thanks for your support.

Jan

3 phase
screenshot-2022-11-18-142313.png (60.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
derrick thomas avatar image
derrick thomas answered ·

Have you loaded ess assistant in all 3 multi's?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.